October 10, 2019

Helpful Tips On Water Leak Detection

Let’s face it. Water damage can be, for the most part, harmful and damaging to your home. For this reason, do not wait for it to slither on you. Put water damage to an end by being motivated, driven, and proactive.

To save your home from leaks or to stop it, it’d be best to conduct a leak detection.

Helpful Tips On Water Leak Detection: eAskme
Helpful Tips On Water Leak Detection: eAskme

Other people are reading:  Things You Wished You Knew Before Buying a Sofa Bed

More often than not, searching for leaks even before they turn into a problem is not always the simplest and most straightforward task.

For a little help, we have compiled five useful tips to help you with leak detection.

Keep these tips in mind to prevent leaks from ruining your home. So, take a read!

Signs Of Leaking

The signs of a water leak can be very subtle. However, if you think you’ve detected a water leak, then it’s best to contact an expert to verify, locate, and fix it immediately.

Many signs could tell you that there’s a water leak around your home.

These signs include unexplained moisture, mold, stains, or dampness in walls. Plus, low water pressure, the sound of dripping water, continuously moving water meter, and unexpectedly substantial water bills.

Act right away if you suspect a water leak.

Inspect Your Meter Line

Flow meters, such as vortex flow meters can give you details about the flow and whether there’s a leak or not.

So, first, search for the shut-off device by the house to check and examine the meter line. Turn it off momentarily, and then take off the lid from the meter line and survey the dial.

However, if you cannot see the lid of the meter, then brush around some debris or dirt situated around it.

Take note that dirt oftentimes grows and covers the meter line. When you take the lid off of the meter, check if the meter is still functioning.

If it’s still running, then the leak is probably between a leaking valve or your house, and the meter.

It is common for the worn-out gate valves. If this is what’s happening, there is a high likelihood that the water leak is in your house.

To figure out where the water leak is coming from, first, trudge the distance between the shut-off device and the meter.

Keep an eye out for muddy or soft areas. Once you have spotted it, it is ideal to call for professional help.

Inspect Your Toilets

First and foremost, you will need to check and inspect your toilets. Keep in mind that the toilets in your house take up so much water as it is.

So, if there is a leak within your toilet, your water consumption rakes higher.

The first thing to do to inspect a leak within a toilet is to take off the lid from the water tank at the back of it. Pay attention to any whistling noises.

When you hear such sounds, try locating the leakage with your ears.

If there is no significant hissing sound, pour red food coloring into the toilet’s tank.

You will just need to add a few drops. Wait for several minutes and then examine and assess the toilet’s bowl.

If the water has become pink in color, then, for sure, there is a leak.

It’s generally because of a leakage in the flapper. Make sure to inspect each toilet in a similar way.

Inspect The Hose Bibs

You also need to examine and inspect the hose bibs outside your home. Nearly all houses have at least one at the back and at the front.

However, to be safe and secure, ensure that these are the only hose bibs at your home.

Once you’ve found the bibs, get a screwdriver and put the metal component of it on the hose bib’s metal portion.

Next, take the knuckle of your thumb and put it at the screwdriver’s end. Then, place your ear on your thumb’s knuckle.

It will work or function like a doctor’s stethoscope. So, if there is a water leak that is not perceivable, you can hear it.

Inspect The Hot Water Tank

You need to check the hot water tank as well as the pressure relief valves in your home. It may be within a drain. Thus, it can be hard to detect and observe a leak.

To find the leak, get rid of the drain pipe.

However, if it is not possible to remove the drain pipe, then pay attention to the hissing noise. When you hear such sounds, then there is undoubtedly a leak.

Consider getting an expert if you see a leak in your hot water tank.

Alternatively, you can check the sitting water close to the tank’s bottom. Inspect for dampness at the end of the discharge tube.

Inspect All Leak Points

For the most part, there are a lot of leak points that you can find in your home. If there is a leak in your showerheads, you will see dripping from it.

Moreover, you can leverage the screwdriver method to check for laundry room sinks, kitchen sinks, bathrooms, bathtubs, and more for leaks.

A leaking faucet is generally caused by a shabby rubber washer. The rubber washer is situated underneath the handle.

You can easily replace it with the right tools. But if you are not sure of it, call a professional plumber.

Other Water Leaks

The water you bathe with and drink is supplied under pressure. As such, a leak can be extremely apparent or visible.

On the other hand, wastewater is typically moved by gravity, meaning it’s not under pressure.

For this reason, wastewater leaks can be more challenging to detect. So, if you think there’s a wastewater leak, call an expert for help.

Moreover, be wary that the precise location of the leak might not always be directly perceptible.

Keep in mind that some leaks might occur at one location or area, then move past along other channels or a ledge for a distance before draining down and creating some apparent damage.

Takeaway

Water leaks can, without a doubt, occur to any property at any time. It does not matter if your home is a brand-new real estate or a heritage home.

If you think or notice there is a leak in your home, then there is no time to squander.

Even a small leak neglected can cause damage to your property that’s significantly expensive or costly to repair.

Such leaks can both damage your home and raise your water bill. Although it is not always easy to detect leaks, it is a necessary task. Big leaks may seem possible to detect.

However, small leaks could be undoubtedly impossible to detect without the help of a water leak detection tool.

Search for discoloration, warped, or wet stains on your woodwork, walls, floors, and ceilings.

As you try to repair, ensure to double-check or verify the actual location or spot of the leak, not only the resulting impairment from the leak.

Moreover, condensation can be a type of water leak too.

Although condensation is relatively normal, too much condensation can cause damage to your woodworking, floors, ceilings, and walls. Leave the work to an expert if you are not sure how to fix it.

Author's Bio:

Sylvia Hopkins is a writer and a blogger who specializes in email marketing campaigns and ghost blogging. She writes about flow measurement instrumentation, flow measurement application, and technology. When not working, Sylvia spends some quality time with her family and friends.

If you still have any question, do share via comments.

If you find this article interesting, don’t forget to share it with your friends and family.

Sharing is Caring!

Don't forget to like us FB and join the eAskme newsletter to stay tuned with us.

Helpful tips for you;
7 Ways to Grow Instagram Audience for Business